Duratron® T4203 Torlon Sheet 3/4" (0.750) x 12 x 48

Duratron® T4203 Torlon Sheet 3/4" (0.750) x 12 x 48

Price: $5,137.00
* Marked fields are required.
*
Qty: *

Please Call if the size you need is not shown

Name: Duratron® SKU: Q100T4203-06 Brand: Duratron® T4203 Manufacturer: Quadrant EPP
Shape: Rod
Resin Type: PAI
Rod Size: 0.75”x12”x48 Weight: 21.9909 lbs Color: Brown-Yellow
Mask: None
Surface Texture: None
Filler: None
Product description:
Duratron T4203 PAI offers the best toughness and impact strength of all Duratron PAI grades. This extruded grade is very popular for precision parts in high-tech equipment. In addition, its good electrical insulating ability provides numerous possibilities in the field of electrical components. Compression moulded Duratron T4503 PAI is similar in composition to Duratron T4203 PAI, and is selected when larger shapes are required.
Your Price: $5137.00 Availability: Please Call

Duratron® T4203

Physical Properties Metric English Comments
Specific Gravity  1.41 g/cc 1.41 g/cc ASTM D792
Water Absorption  0.40 % 0.40 % Immersion, 24hr; ASTM D570(2)
Water Absorption at Saturation  1.7 % 1.7 % Immersion; ASTM D570(2)
Mechanical Properties Metric English Comments
Hardness, Rockwell E  80 80 ASTM D785
Hardness, Rockwell M  120 120 ASTM D785
Tensile Strength  138 MPa 20000 psi ASTM D638
Tensile Strength at 150°C (300°F)  103 MPa 15000 psi ASTM D638
Tensile Strength at 65°C (150°F)  124 MPa 18000 psi ASTM D638
Elongation at Break  10 % 10 % ASTM D638
Tensile Modulus  4.14 GPa 600 ksi ASTM D638
Flexural Strength  165 MPa 24000 psi ASTM D790
Flexural Modulus  4.14 GPa 600 ksi ASTM D790
Compressive Strength  165 MPa 24000 psi 10% Def.; ASTM D695
Compressive Modulus  3.30 GPa 478 ksi ASTM D695
Shear Strength  110 MPa 16000 psi ASTM D732
Izod Impact, Notched  1.07 J/cm 2.00 ft-lb/in ASTM D256 Type A
Coefficient of Friction, Dynamic  0.35 0.35 Dry vs. Steel; QTM55007
K (wear) Factor  70.5 x 10-8 mm³/N-M 35.0 x 10-10 in³-min/ft-lb-hr With post-machine cure cycle; QTM 55010
Limiting Pressure Velocity  0.420 MPa-m/sec 12000 psi-ft/min 4:1 safety factor; QTM 55010
Electrical Properties Metric English Comments
Surface Resistivity per Square  >= 1.00e+16 ohm >= 1.00e+16 ohm EOS/ESD S11.11
Dielectric Constant  4.2
@Frequency 1e+6 Hz
4.2
@Frequency 1e+6 Hz
ASTM D150
Dielectric Strength  22.8 kV/mm 580 kV/in Short Term; ASTM D149
Dissipation Factor  0.026
@Frequency 1e+6 Hz
0.026
@Frequency 1e+6 Hz
ASTM D150
Thermal Properties Metric English Comments
CTE, linear  30.6 µm/m-°C
@Temperature -40.0 - 149 °C
17.0 µin/in-°F
@Temperature -40.0 - 300 °F
ASTM E831
Thermal Conductivity  0.259 W/m-K 1.80 BTU-in/hr-ft²-°F ASTM F433
Maximum Service Temperature, Air  260 °C 500 °F Long Term
Deflection Temperature at 1.8 MPa (264 psi)  278 °C 532 °F ASTM D648
Glass Transition Temp, Tg  275 °C 527 °F ASTM D3418
Flammability, UL94  V-0 V-0 1/8 inch (Estimated Rating)
Compliance Properties Metric English Comments
3A-Dairy  No No
Canada AG  No No
FDA  No No
NSF  No No
USDA  No No
USP Class VI  No No
Chemical Resistance Properties Metric English Comments
Acids, Strong (pH 1-3)  Limited Limited
Acids, Weak  Acceptable Acceptable
Alcohols  Acceptable Acceptable
Alkalies, Strong (pH 11-14)  Unacceptable Unacceptable
Alkalies, Weak  Limited Limited
Chlorinated Solvents  Acceptable Acceptable
Conductive / Static Dissipative  No No
Continuous Sunlight  Limited Limited
Hot Water / Steam  Limited Limited
Hydrocarbons - Aliphatic  Acceptable Acceptable
Hydrocarbons - Aromatic  Acceptable Acceptable
Inorganic Salt Solutions  Acceptable Acceptable
Ketones, Esters  Acceptable Acceptable
Miscellaneous Properties Metric English Comments
Data Sheet Region  Americas Americas
Targeted Usage  Structural Uses Structural Uses
Descriptive Properties
Machinability 5 1-10, 1=Easier to Machine

Please review our Return Policy before ordering.


For Custom Cut orders:
  • Click the Custom Cut Instructions Box and Enter your measurements.
  • Remember that Custom Cut Materials Cannot be Returned. See our Returns Policy for more details.
  • Our automated saw has a tolerance on cut to size and square foot increments of +/- .062”

Overview Duratron® Product Family.

Audience: engineers, machinists.
Reviews (0) Write a Review
No Reviews. Write a Review